Schulze PRETREATmaker IV Pretreatment Machine
The Schulze PRETREATmaker IV is an automatic high-end pretreatment machine for professional high volume customers resulting from consistent refinement and trend insights.
As a novelty the unit is equipped with a multiphase motor (step motor). This Pretreatment Machine does have a total of 4 spray valves which can be individually switched on or off. The maximum spray area is 16″ in width and 24″ in length.
The width can be regulated by switching the 4 spray nozzle valves on or off. Therefore the minimal spray width is 4.7 inches – the ideal width for chest prints. The length can be regulated in 0.78 inches intervals. Spraying is possible uni- and bi-directional. This will allow each user to setup the unit according to their needs.
Within the carriage there is an additional filter which traps dirt from pump and tubes. This innovative filter will help to minimize clogging of the nozzles.
New switch-valve allows the user to use two different pretreatment liquids. An additional switch is used to clean the pretreatment pump (incl. pipe system). For that purpose the machine offers an automatic cleaning function within the touch screen menu. All drawer rails are now equipped with an improved protection system.
The Schulze PRETREATmaker IV is available with an optional scale which can be connected to the machine. After each cycle his innovation will show in the display the amount of pretreatment being used. A useful feature to see if nozzles and system are working right. An additional feature is unlocked and will show low volume levels of pretreatment on the display.
Another special feature of the PRETREATmaker IV is its open interface that which can be used to program the unit either directly through the client’s order system or by printing a barcode. This optional feature will simplify and speed up your workflow. With this feature the Schulze PRETREATmaker IV can be operated by untrained staff. Please refer to Barcode_Interface_Instruction_PRETREATmaker_IV_8_2016
Schulze PRETREATmaker IV is equipped with our well-known and well-proven automatic cleaning interval function. This feature prevents the nozzles from clogging during daily operation. Flushing of the nozzles with cleaning solution or water is limited to the last 4 inches of tube before the nozzles. This feature saves a lot of pretreatment liquid.
Container sizes are: 1 x 10 L Prtreatment, 1 x 5 L Prtreatment, 1 x 5 L Cleaning Solution, 1 x 5 L Waste Tank
Spray Area: 16″ x 24″
Dimensions: 36″ W 28.8″ D, 19.2″ H
Weight: 154 lbs. (Approx).
Electrical Connections: 220/230 or 110/120 AC
Pretreatmaker IV Cleaning Videos
RETURN AND REFUND POLICY
We do not accept returns for this machine. We do offer the 12 month warranty for replacement parts as listed in the warranty agreement.